C and Z Purlin Manufacturer in Telangana

Purlin in Telangana is generally cold formed purlins and girts, being efficient and economical structural members suitable for a wide range of building applications. LCP Building Products Pvt. Ltd. is considered as the best purlin manufacturer in Telangana which offers a full range of section depths ranging from 50mm up to 350mm deep for 'C' Purlin and from 100mm to 300mm deep for 'Z' Purlin.Various organization prefer LCP as best purlin supplier in Telangana and overseas.

• High tensile steel - for high strength and low weight.
• Available in varied Zinc coating -Z120 GSM, Z180GSM & Z275 GSM in accordance with AS 1397.
• Full range of Accessories - from brackets to bolts to ensure easy use and installation.
• Full size range - for ease of design in both C & Z sections.
• Available in standard (240 MPa/ 345 MPa) and non-standard yield strength.
• Designed in accordance with AS 1538 and also conforms to BS 5950 and IS 875.
• Downturn* lip available - For those projects requiring this feature.
• Special size capability*- non-standard range of special shapes and channels available to suit individual requirements subject to minimum oder quantity and lead time.

GALVANISED PURLIN (GI) COATING MASS : Z 120 GSM

C-Section

GALVANISED PURLIN (GI) ) COATING MASS : Z 275 GSM

C-Section

GALVANISED PURLIN (GI) COATING MASS : Z 120 GSM

Z-Section

GALVANISED PURLIN (GI) ) COATING MASS : Z 275 GSM

Z-Section

LCP C & Z Purlins and LCP Girts are manufactured from G240 MPa, G345 MPa Steel ranging from 1.6mm thick to 3.15mm thick) with a minimum Z120 galvanized coating (120g/m2) and a maximum of Z275 galvanized coating (275g/m2). All purlins and girts shall be LCP C & Z Purlin sections, supported by submission of effective section properties, purlin capacity calculations and a performance warranty, produced and detailed for this project.

All cold-formed sections conforming to AS 1397 (or equivalent), with zinc coating from Z120 (120g/ m2) to zinc coating of Z275 (275g/ m2) having a minimum yield strength of 240 MPa to maximum yield strength of 345 MPa. All sections should be installed in accordance with the manufacturer’s instructions with particular regard to bolt locations on both web and flanges and lap sizes of 15% span. For more information on appropriate purlin section and other coatings, please contact LCP Building Products Pvt. Ltd., Technical Department.

Direct contact between galvanized LCP C & Z Purlin with other dissimilar material, for example copper pipe (bi-metallic corrosion) or treated timber (chemical corrosion) must be avoided to prevent premature corrosion.

Click here to view/download the brochure.

Click here to view the brochure.